Gerber OMEGA CP Reference Manual page 612

598 Chapter 51:
Sending the Job to a Plotter or Printer
Choosing what to print
Use the Options tab in the Print dialog box to set the margins, size, placement, type, and line
width of the printout.
To choose what to print
1 Click File > Print...to open the Print dialog box and then click the Options tab.
2 Choose the options as follows:
♦
Turn on Header to print the file name, scale, and job size at the top of the
page. When Header is activated, turn on Full Path, to print the full path for
the file in the header.
♦
Turn on Show Points to print open and closed points in the job when
Wireframe or Black Wireframe is chosen as the Output Type on the Output
tab. Show Points is unavailable when Filled is the Output Type.
♦
If you are zoomed in, turn on Print Window Only to print only the currently
visible portion of the job.
♦
Turn on Templates to print filled images that are identified as templates in
the Image Fill dialog box.
♦
Turn on Guidelines to print the Composer guidelines on top of the printed
job. Turn off this option to print the job without guidelines. When
Guidelines is turned on you can choose a Style from the list: Dot, Dash,
Dash Dot, or Dash Dot Dot.
♦
Turn on Print Dimensions to print any dimensions that are in the job. You
must be in Composer's Design View to display dimensions in Print Preview
and paper print them. Dimension objects may fail to display or print if you
are in Output View. To change the view in Composer, click View > Design
View.
3 Click OK to print.
Changing printers or printer properties and options
Refer to your Microsoft Windows manual for using the Print and Print Setup dialog boxes.