Gerber OMEGA CP Reference Manual page 486

472 Chapter 43:
Fitting Text to Path
To position text with the move tool
1 Click Custom Justify.
2 Select the text to be moved.
3 Click the Move tool.
4 Drag the selected text to the new location on the path.
5 Click the Move tool to end custom justification.
Note: Text can be moved off the end of the path. In the previous example, the text continues in
the direction established at the end of the path even though there is no more path.
Moving text above or below the path
The Baseline Shift tool allows you to move text above or below a closed or open path.
The text does not need to be selected, and all the text is moved.
Use the Snap to Baseline mode with the Baseline Shift tool. When Snap to Baseline is on,
the text snaps to the 0%, +50% or +100% position on the path when the text is moved
near those values.
The Show Connection Points mode displays the connection point where each text
character is attached to the path. The connection point is displayed as a cross. The
connection point remains on the path even if you move the text off the path using the
Baseline Shift tool.