Gerber OMEGA CP Reference Manual page 458

444 Chapter 40:
Outline Objects
To change all outline spacing
1 Select the object to outline.
2 Click Tools > Outline to open the Outline dialog box.
3 Choose the Pass, Corner Type, Number of Outlines, and the Outline Distance.
4 Click Advanced to open the Advanced Outline dialog box.
5 Click a Standard Spacing button.
6 Change the number of outlines and maximum outline distance as necessary.
7 Click Replace Current Spacing. The new spacing appears in the graphic display at the
bottom of the Advanced Outline dialog box. The green bar represents the edge of the
object.
8 Click OK in the Advanced Outline dialog box.
9 Click OK in the Outline dialog box.
Moving individual outlines by measurement
When moving individual outlines, the one you move is the one shown as a red bar in the
graphic display at the bottom of the Advanced Outline dialog box. The green bar represents the
edge of the object. The black bars represent other outlines. Use the following procedure to
change one or more individual outlines.
To move an individual outline by measurement
1 Select the object to outline.
2 Click Tools > Outline to open the Outline dialog box.
3 Choose the Pass, Corner Type, Number of Outlines, and the Outline Distance.
4 Click Advanced to open the Advanced Outline dialog box.