Gerber OMEGA CP Reference Manual page 411

6 Position the puck over the next point on the shape and click button 2 (F11) again to
Start Curve Smooth, then click button 1 to digitize the point.
7 Digitize the points along this curve using button 1 until reaching the point labeled 2,1.
At this point click button 2 (F11) to End Curve Smooth, and then digitize the point
with button 1.
8 Click button 3 (End) to Close Shape.
To digitize the left petal
1 Begin digitizing the left petal at the point marked by the S. Click button 1.
2 Move the puck to the next point in the direction indicated by the arrow and click
button 1 again.
3 Move the puck to the next point and click button 4 (F12), Start Curve Abrupt, and then
click button 1 to digitize the point.
4 Digitize the next two points along the curve using button 1. At the last point on the
curve segment, click button 4 (F12) to End Curve Abrupt and click button 1 to digitize
the point.
5 The next point is the beginning of another abrupt curve. Click button 4 (F12) again and
digitize the point with button 1.
6 Digitize the next two points along this curve with button 1.
7 Click button 4 (F12) to End Curve Abrupt, then click button 3 (End) to Close Shape.
The shape will be closed with a curved line segment.
To digitize the box
Left Petal
Box
397