Gerber OMEGA CP Reference Manual page 560

546 Chapter 49
Converting TrueType Fonts to OMEGA-Compatible Fonts
6 Click Open to display the "H" in Composer.
7 Click the Measure tool in the main toolbar. Measure the "H" from the
heightline to the baseline. Make note of the height shown in the display area.
8 Close Composer.
Using Font Designer to establish kerning
You may increase or decrease the space between the characters. The height of the characters is
determined by the height of the "H" from the previous steps. If you choose to ignore the height
of the "H", the program will use whatever height existed when the font was originally opened.
To use Font Designer to establish kerning
1 Click Start > Programs > GSP OMEGA > Font Designer to open the Font Designer
dialog box.
2 Click File > Set Directory to open the Browse for folder dialog box.
3 Browse to the directory that contains the converted and disjoined TrueType font and
click OK.
4 Click File > Font Settings to display the Font Settings dialog box.