Gerber OMEGA CP Reference Manual page 608

594 Chapter 51:
Sending the Job to a Plotter or Printer
Outputting selected objects only
Sometimes you may just want to send part of a job (to make a test print, for example). The
Output Selected command in the File menu allows you to do this.
To output selected objects only
1 Select the objects to send to GSPPlot.
2 Click File > Output Selected.
3 GSPPlot-QuickPlot opens with the selected objects displayed on the plot work surface.
Outputting by vinyl color
If you create a multi-color vinyl job, the most efficient way to cut it in GSPPlot is to output the
job using the Output By Vinyl command in the File menu. You can output the entire job or just
specific vinyl colors. Choose which vinyl to send to GSPPlot in the Output By Vinyl dialog box.
Tip: To save vinyl, turn on Reduce Frame. The disadvantage is that you must individually
register the objects when you apply them to the substrate.
Tip: Clear the Large Icons option to display the vinyls using small icons.
To output a single vinyl color
1 Click File > Output By Vinyl to open the Output By Vinyl dialog box.
2 Click on the color to output.
3 Click OK, GSPPlot - QuickPlot opens with the selected vinyl objects displayed on the
plot work surface. Refer to "Printing and Cutting the Job" to use GSPPlot.
To output multiple vinyl colors
1 Click File > Output By Vinyl to open the Output By Vinyl dialog box.