Gerber OMEGA CP Reference Manual page 602

588 Chapter 50:
Designing and Building Your Own Fonts
5 Click ToolPaths > Cleanout to display the Default Cleanout Info dialog box.
6 Make the appropriate selections from the dialog box. Refer to OMEGA ART Path &
Auto-Carve User's Guide for further information on how to use the Default Cleanout
Info dialog box.
7 Click Generate. The insides of the characters are cleaned out. It may take several
minutes for this tool path to generate.
8 Click File > Save Plot File to display the Save As dialog box.
9 Choose PLT as the file type.
10 Click OK to save the file containing the cleaned out characters.
11 Close the ART Path program.
Note: Make a note of the tool size used to generate the clean out tool path. The tool you choose
to create the clean outs must be used when you rout the clean out font.
To access the characters in Composer
1 Click Start > Programs > GSP OMEGA > Composer.
2 Click File > Open and choose the PLT file you just saved.
3 Click one of the characters with the Selection Tool. The entire font is selected.
4 Click Shape > Ungroup. The characters become individually selected.