Gerber OMEGA CP Reference Manual page 561

5 Type a name for the font in the Font Title text box.
Note: Refer to "Designing and Building your own fonts" for more information on the Font
Settings dialog box.
6 Tab to Cap Height Line.
7 Type the "H" height noted in Step 7 of the procedure, "To use Composer to check the
template character."
8 Click Ok.
9 Click Setup on the menu bar to display the Font Designer status box while the font
converts. When the conversion is complete, the Kern Setup dialog box opens.
10 If you wish to adjust the kerning for individual characters, refer to "Setting kern
pairs." When finished, click Process to display the Kern Process dialog box.
11 You may tighten or loosen kerning by using the slider.
12 Click Process to process the font with kerning adjustments. You can now use the
newly created font in Composer, as it will be listed in the Fonts list.
Setting kern pairs
To establish kerning between pairs of characters, use the GSP Kern program.
To set kern pairs
1 Click Start > Programs > GSP OMEGA > GSP Kern to open the GSP Kern dialog box.
547