Gerber OMEGA CP Reference Manual page 277

To change the vinyl order
1 Click Arrange > Print/Output Order to open the Print/Output Order dialog box.
2 For layered jobs select a layer from the drop-down menu.
3 Click the vinyl color to change.
4 Drag the vinyl to a new location in the list.
OR
Repeatedly click the Up or Down button to change the location of the vinyl in the
Print/Output Order. The first vinyl in the list is at the bottom of the stacking order
followed by subsequent vinyls in the list.
5 Click OK.
6 Press F8 to preview the design filled.
Changing the foil print order
Spot color foils can be printed in user-specified order. If spot colors are not overprinted or
overlapped, then the print order does not have an effect on how a job will look once it is printed
because all the colors will "knock out." If overprint or overlap are turned on for one or more
spot colors, the print order can have an effect on the way a finished job looks once it is printed.
Overprinted or overlapped colors must print after other colors in a job. Be sure to preview the
design after changing the order.
To change the print order of foils
1 Click Arrange > Print/Output Order to open the Print/Output Order dialog box.
2 For layered jobs select a layer from the drop-down menu.
3 Click the foil color to change.
4 Drag the foil to a new location on the print order list.
OR
Click Up or Down repeatedly to change the print order. The top foil in the list prints
first followed by subsequent foils in the list.
5 Click OK.
6 Press F8 to preview the design filled.
Rebuilding the Print/Output Order
If after rearranging the Print Order you change your mind, click Rebuild in the Print/Output
Order dialog box. The Print/Output Order for the selected vinyl on the selected layer is
returned to the original stacking order.
263