Gerber OMEGA CP Reference Manual page 54

40 Chapter 5:
Setting Up Composer's Work Surface
Settings group box
Turn on Emulate OMEGA CS (i.e. vinyl only) to force OMEGA CP (Cut/Print) to display
jobs as vinyl only, thus imitating the behavior of OMEGA CS (Cut Solution).
Turn on Suppress Fill Cuts to create new objects and text that are print only. Suppress Fill
Cuts is also a command in the Arrange Menu. See the topic: Filling without cutlines for
details.
By default Display Warning Message Boxes is turned on to display all
warning message boxes. Turn off this check box so that warning message
boxes do not displayed.
The Use Default Monument Settings on Start check box displays only if you have the
OMEGA Monument option. It is turned on by default.
Undo
You can set the Number of Undo levels from 1 to 100. See the topic: Setting the Number of
Undo operations for details. The default number is 10.
Colors
You can modify the colors assigned to OMEGA objects to suit your needs. In the Colors box,
choose an item from the drop down list. Click Edit Color to display the Selected Color dialog
box. Select a different color from the basic color palette or define a Custom Color. See the
View tab for additional information on wireframe colors.
Sounds
Direct access to the Sound Properties of Windows Control Panel is provided on the General
tab of the Tools > Options dialog box. Click the Edit button to open the Sounds Properties
dialog box. Composer's sound events display at the end of the Events list.
Select a Composer event and choose a sound from the Name drop down list. You can map
custom sounds to specific events by selecting an event, clicking the Browse push button, and
then navigating to any directory that contains WAV files and selecting one.
Palette Scroll Speed
You can adjust the speed at which the vinyl and foil palettes scroll when you press the arrow
buttons at either end of the palette. Click and drag the slide control between Fast and Slow.
The sample palette allows you to test the selected speed setting.
Tablet
Tablets are now installed via the General tab of the Tools > Options dialog box rather than
through GSPSetup. Click the Select button to open the Tablet Selection dialog box. Choose
the correct size tablet and click OK. You must save Preferences to permanently save the tablet
setting. For complete installation instructions and trouble shooting see "Chapter 36:
Digitizing Artwork."