Gerber OMEGA CP Reference Manual page 420

406 Chapter 37:
Using the Edit Menu
♦ Paste to paste the information into the center of the work surface. Subsequent pastes
result in pasting the same object or text slightly offset from the previous one. The
offset value is configured on the Detail tab of the Tools > Options dialog box.
♦ Paste Back to paste the information to the original location.
♦ Paste Special to paste the information onto the work surface in the format you specify.
♦ Right Click, then choose Paste Here to paste the information at a specific location. The
pasted information is centered on where the right mouse click occurred to access the
Paste Here Command.
Note: The Cut command in the Edit menu removes an object from the job and places it into the
clipboard, while Copy leaves the object in the job and places a copy onto the clipboard.
Information copied onto the clipboard can be pasted into another existing file.
Tip: Once you copy from Composer, you can paste into other programs such as CorelDraw,
Word for Windows, and other programs that offer Windows Clipboard Support.
To use Copy To
1 Select the object to copy.
2 Click Edit > Copy To to open the Save As dialog box.