Voice Announcement To Busy Telephone - AT&T Merlin II Release 3 System Manual

Voice Announcement To Busy Telephone

DESCRIPTION
CONSIDERATIONS
RELATED FEATURES
1 Enter administration mode by sliding the T/P switch to P.
2 Press Conference twice.
The administration menu appears.
3 Press
[Stations], [More], [More], [VceSgnl].
4 Press either of two adjacent Auto Intercom buttons until the green lights next to both
buttons show the appropriate code:
Green light on = station jack is part of voice/voice pair
Green light off = station jack is not paired
5 Press Conference to return to the main administration menu, or leave administration
mode.
You can assign some phones two consecutive analog phone jacks on the
control unit so that people at these phones can receive voice announcements
while they are busy on a call.
You must assign the phone two consecutive analog telephone jacks on the
control unit. The first jack must be an odd-numbered analog station jack
and the second jack the next higher even-numbered analog station jack.
The phone is then assigned the intercom number corresponding to the
odd-numbered station jack.
NOTE: Odd/even refers to control unit jack numbers not intercom
numbers.
You can assign a phone either the Voice Announcement To Busy
Telephone feature or the Simultaneous Voice and Data feature but not
both.
This feature is not available with basic telephones.
This feature decreases the number of telephones a system can have.
Simultaneous Voice and Data
How to Administer
MERLIN System Features 3-143