Table of Contents
Advertisement
To select the Direction:
1 Have completed Form 1b, System Form—Tie Lines, handy.
2 Enter administration mock by sliding the T/P switch to P.
3 Press Conference twice.
The administration menu appears.
4 Press
[More], [More], [More], [TieLines], [Directn].
Enter the line number, then press
Select the direction of the tie line
— Two way (default)
— Outgoing
— Incoming
Repeat step 3 for each tie line port.
5 Press Conference to return to the main administration menu, or leave administration mode by
sliding the T/P switch to the center position.
In a square system or a behind switch system, tie lines should be
administered as automatic ringdown tie lines. To have the automatic
ringdown act as a dial repeating tie line, you can designate one telephone as
an "answering station" that will answer each incoming tie line call and will
transfer it to the appropriate extension. Calls will then be transferred from
the answering station by the usual transfer procedure.
To setup an answering station, set the ring option on the tie line to "ring" at
the designated answering station phone and to "no ring" at all other
extensions assigned to the tie line. Refer to the MERLIN II Communication
System Installation, Administration, and Maintenance Manual for information
on setting the ring option.
How to Administer
[Enter].
(Continued)
MERLIN II System Features 3-131
Advertisement
Table of Contents
