Table of Contents
Advertisement
Music-on-Hold
DESCRIPTION
CONSIDERATIONS
RELATED FEATURES
1 Enter administration mode by sliding the T/P switch to P.
2 Press Conference twice.
The administration menu appears.
3 Press
[More], [Options], [Music].
4 Press the line button:
Green light on = Music-on-Hold jack
Green light off = standard line or Loudspeaker Page jack
5 Press Conference to return to the main administration menu or leave administration mode
by sliding the T/P switch to the center position.
When you have Music-on-Hold, you can provide background music for callers
whom you have placed on hold, and you can provide music for selected areas
of your building through the loudspeaker paging system. You can use a
radio, tape player, or stereo system as a music source for this feature.
NOTICE:
Users of equipment that rebroadcasts copyrighted music or other
material may be required to obtain a license from a third party,
such as ASCAP or BMI.
This feature requires a music coupler.
You must designate the line jack to which the music coupler will be
connected.
There can be only one jack assigned as the Music-on-Hold jack.
This feature does not work over tie lines.
You can designate any jack as the Music-on-Hold Jack except a line jack
used for any of the following:
A line that is contained in a line pool
A line that appears as a line or line pool button
A line to which the loudspeaker paging system is connected
When someone within the MERLIN II system transfers a call the caller is
automatically connected to Music-on-Hold if the system has the feature.
You may choose to administer the Ringing-on-Transfer feature so that the
caller hears ringing instead.
Ringing-on-Transfer
How to Administer
MERLIN II System Features
3-93
Advertisement
Table of Contents
