AT&T Merlin II Release 3 System Manual page 53

How to Program
In systems set for behind-switch operation, you can
program buttons that let you:
Use dial codes to access features while you're on
a call
Use the MERLIN II system Conference, Transfer,
and Drop features instead of the equivalent
features of the host system
Speed Dial Access:
1 Label a button "Speed Dial Access."
2
Enter programming mode by sliding the T/P
switch to P. (Digital phones 7406B and 7604D:
Dial #33.)
3
Press the button you want to program.
4 Dial *20.
5
Program another feature, or leave programming
mode by sliding the T/P switch to the center
position. (Digital phones: Dial #00.)
Local Conference, Drop, and Transfer Buttons:
1 Label the button you want to program.
2 Enter programming mode by sliding the T/P
switch to P. (Digital phones: Dial #33.)
3 Press the button you want to program.
4 Dial the appropriate code:
Dial *96 for Local Conference
Dial *97 for Local Drop
Dial *99 for Local Transfer
5 Program another feature, or leave programming
mode by sliding the T/P switch to the center
position. (Digital phones: Dial #00.)
Camp On:
1 Label a button.
2 Enter programming mode by sliding the T/P
switch to P. (Digital phones: Dial #33.)
3 Press the button you want to program.
4 Dial *29.
5 Program another feature, or leave programming
mode by sliding the T/P switch to the center
position. (Digital phones: Dial #00.)
3-24 Merlin II System Features
How to Use
Some features operate differently if a MERLIN II
system is behind another system. Note these
differences in each feature entry in this section of the
manual. For information on how to use the speed
dial access button in behind-switch systems, see
"PBX, Centrex, or Custom calling Features" in this
section.
NOTE: To use the fixed button features of the host
system, use the instructions that came with
that system.
Generally, the Local Conference, Hold, and Drop
buttons function as described in this section for each
feature.