Table of Contents
Advertisement
How to Program
You can assign immediate, delayed, or no ring to
individual lines or line pools on your phone or
you can program the same option for all your lines
and line pools. You assign Abbreviated or
Repeated Ringing to all your lines or line pools.
1 Enter programming mode by sliding the T/P
switch to P. (Digital phones: Dial #33.)
2 Take the appropriate action:
To assign immediate, delayed, or no
ringing to an individual line or line pool
button, press the button and dial the
appropriate code:
— Dial *35 for No Ring.
The red light next to the line button goes off.
— Dial *36 for Delayed Ring.
The red light next to the line button flashes.
— Dial *37 for Immediate Ring.
The red light next to the line button goes on
steady.
To assign immediate, delayed, or no ring
to all the lines and line pools at your
phone, press any line button and dial the
code for the type of ringing you prefer:
— Dial *345 for No Ring.
The red lights next to all the line buttons go off.
— Dial *346 for Delayed Ring.
The red lights next to all the line buttons flash.
— Dial *347 for Immediate Ring.
The red lights next to all the line buttons go on
steady.
3 To select Abbreviated or Repeated Ringing for
incoming calls to a busy phone, press one of
your line or line pool buttons and dial the
appropriate code:
Dial *341 for Abbreviated Ringing.
Dial *342 for Repeated Ringing.
4 Leave programming mode by sliding the T/P
switch to the center position. (Digital phones:
Dial #00.)
3-118 MERLIN II System Features
How to Use
Even if you program the lines on your phone not
to ring, you can tell if a call comes in for you
because the green light next to the line button still
flashes. To answer the call:
1
Press the line button next to the flashing green
light.
Lift your handset.
2
Advertisement
Table of Contents
