Table of Contents
Advertisement
How to Program
Personalized Ringing for an analog phone:
1
Enter programming mode by sliding the T/P
switch to P.
You hear the ringing sound your phone makes.
2
Press Speaker.
You hear another ringing pattern.
Press Speaker repeatedly until you hear a
ringing pattern you like.
3
Leave programming mode by sliding the T/P
switch to the center position.
Personalized Ringing for a digital phone:
If you have a 7406D phone, use one of these
procedures to select a ringing pattern for your
phone. You can select a personalized ringing
sound by using two buttons on your phone or
using a dial code.
To use the Shift button and the Select Ring button
to program the Personalized Ringing feature:
1
Press Shift.
The light next to the Shift button goes on.
Press Select Ring.
2
The light next to the Shift button flashes. The display
unit shows the message, "Personalized Ring #x." You
hear the current ringing sound your phone makes.
3
Press Select Ring again.
You hear another ringing pattern. The display unit shows
the message, "Personalized Ring #x" for the next ringing
sound.
4
Press Select Ring repeatedly until you hear a
ringing pattern you like.
5
To save the ringing sound you have selected,
press Shift again.
The green light next to the Shift button goes off.
3-106 MERLIN II System Features
by
(Continued)
How to Use
After you have programmed your Personalized
Ringing preference, you don't need to do
anything else to use the feature. When a call rings
at your phone, you hear the ringing pattern you
have chosen.
Advertisement
Table of Contents
