AT&T Merlin II Release 3 System Manual page 69

1 Enter administration mode by sliding the T/P switch to P.
2 Press Conference twice.
The administration menu appears.
3 Press
[More], [More], [Cntr Prg].
4
Press the Auto Intercom button for the phone to be programmed.
5 Press
[Enter].
6 If the display shows "System busy—please wait" try again later.
7
Perform the steps shown in the programming procedure for the
entering and leaving programming mode.
8 Press Conference to return to the main administration menu, or
mode by sliding the T/P switch to the center position.
FIGURE 3-5 Button location codes for analog phones.
3-40 MERLIN II System Features
How to Administer
If not, go to step 7.
feature, except for
leave administration