Table of Contents
Advertisement
How to Program
1 Label a button with lights.
2 Enter programming mode by sliding the T/P
switch to P. (Digital phones: Dial #33.)
3 Press the button you want to program.
4 Dial *71.
5 Program another feature, or leave
programming mode by sliding the T/P switch
to the center position. (Digital phones: Dial
#00.)
Drop
DESCRIPTION
CONSIDERATIONS
RELATED FEATURES
How to Program
No programming necessary.
3-54 MERLIN II System Features
If you get a busy signal or no answer as you set up a conference call, or if
you want to disconnect a person or line you added to the conference call, you
can use the Drop feature.
Only the originator of the conference call can drop people from the
conference.
If you press the switchhook, you cut off everyone on the call.
If you drop a line that has other people bridged onto it, those people are
also disconnected from the conference call.
Conference
How to Use
To prevent calls from ringing at your phone:
1 Press Do Not Disturb.
The green light next to the button goes on.
This feature remains active until you:
1 Press Do Not Disturb again.
The green light next to the button goes off.
How to Use
To disconnect a person or line in a conference
call:
1 Press Drop.
2 Press the line button of the person you want to
disconnect from the conference.
Advertisement
Table of Contents
