Table of Contents
Advertisement
1
Enter administration mode by sliding the T/P switch to P.
2
Press Conference twice.
The administration menu appears.
Press
3
[More], [Options], [More], [More], [More].
4
Press
[ICMdial].
5
Take the appropriate action:
Press
[Internl]
Press
[Externl]
6
To continue administration, press Conference or leave administration mode by sliding the
T/P switch to the center position.
Labels for Lines and Stations
DESCRIPTION
CONSIDERATIONS
NOTE:
When transferring a call from a basic telephone, you will not hear an
intercom dial tone.
How to Administer
to provide the MERLIN II intercom dial tone.
to provide the outside line dial tone.
When the system is first set up, display messages for intercom and incoming
calls, Group Page calls, transfer returns, and Leave Word Calling are
identified by their line or stations numbers. For example, a station display
might read:
Tfr Ret 18.
From the console, you can associate alphanumeric labels such as telephone
numbers or people's names with line or station numbers so that the displays
are more meaningful and make call handling easier, especially for attendants.
If you assign an alphanumeric label to a phone, that label appears on people's
displays in place of the line or intercom number. For example, a line label
might read:
5551234
or it could be the name of the department, such as:
PARTS
Labels for lines and stations can only be administered from the MERLIN II
system display console.
Labels for lines only appear when the line button is pressed before
answering a call.
All display phones in the system can show a line label when outside calls
come in (if the line button is pressed before answering the call) and a
station label when intercom calls come in. In addition, the display console
provides the station label for Hold, Transfer, Camp On, and Call Park
calls.
MERLIN II System Features
3-71
Advertisement
Table of Contents
