Table of Contents
Advertisement
1 Have a completed Form 1a, System Form—Incoming Lines, handy.
2 Enter administration mode by sliding the T/P switch to P.
3 Press Conference twice.
The administration menu appears.
4 Press
[Lines], [ D I S A ] .
5 If callers must dial a password to make DISA calls, dial a four-digit password. (If you
don't want to administer a password, go on to step 6.)
6 Press
[Enter].
7 Press
[NoRestr]
8 Press the line buttons until the lights show:
Green light on = line or line pool can be used for DISA
Green light off = line or line pool cannot be used for DISA
9 Press Conference to return to the main administration menu, or leave administration
mode by sliding the T/P switch to the center position.
How to Program
No programming necessary.
Disallowed Lists
DESCRIPTION
3-46 MERLIN II System Features
How to Administer
for no restriction, or press
You can prevent people in your business from making unnecessary calls to up
to 80 different area codes, exchanges, or specific numbers by assigning
Disallowed Lists to their phones. Up to eight Disallowed Lists with as many
as ten numbers can be assigned. Each number on the list can be up to 12
digits and can also contain wild card characters (indicated by pressing Hold)
to simplify administering restrictions to several numbers, such as all area
codes. Disallowed Lists can be assigned to any phone in the system, even to
unrestricted phones.
for inward restriction.
[InwdOnly]
1 From a Touch-Tone telephone outside the
MERLIN II system, dial the number of a line
administered for DISA.
If the line is available, you hear ringing, then a dial tone.
2 Dial the DISA password, if required.
You hear a dial tone.
3 Take the appropriate action:
For an intercom call, dial the intercom
number or Call Distribution Group code.
For a call outside the system, dial the line
or line pool number. When you hear a
dial tone, dial the telephone number.
How to Use
Advertisement
Table of Contents
