Table of Contents
Advertisement
How to Program
To program a Reminder Set button:
1 Label a button.
2 Enter programming mode by sliding the T/P
switch to P. (Digital phones: Dial #33.)
3 Press the button you want to program.
4 Dial *28.
5 Continue programming or leave programming
mode by sliding the T/P switch to the center
position. (Digital phones: Dial #00.)
To program a Reminder Cancel button:
1 Label a button.
2 Enter programming mode by sliding the T/P
switch to P. (Digital phones: Dial #33.)
3 Press the button you want to program.
4 Dial *27.
5 Continue programming or leave programming
mode by sliding the T/P switch to the center
position. (Digital phones: Dial #00.)
To program a Missed Reminder button (Display
Console only):
1 Label a button with a light.
2 Enter programming mode by sliding the T/P
switch to P.
3 Press the button you want to program.
4 Dial *102.
5 Continue programming or leave programming
mode by sliding the T/P switch to the center
position.
How to Use
Procedures for setting and canceling Reminder
Service calls from attendant consoles and from
individual phones are somewhat different. Follow
the appropriate procedure below.
NOTE:
If your console or phone has a display, it
shows the following:
the feature status when you enter a
feature code or press a feature button
new settings as you dial them
You can check an existing setting by pressing
Reminder Set, verifying that the time shown on
the display is correct, then pressing Reminder Set
again.
To set personal reminder times:
1 Take the appropriate action:
Press Reminder Set.
Press Intercom-Ring or Intercom-Voice.
— Lift your handset.
— Dial *81.
2 Dial the 4-digit reminder time in a 12-hour
format (1200 through 1159).
3 To indicate a.m. or p.m.:
For a.m. dial 2 (A)
For p.m. dial 7 (P)
4 If the light next to Reminder Set goes off,
indicating an invalid entry, repeat steps 1
through 3.
To cancel personal reminder times:
To cancel a reminder that you have set for your
phone, press Reminder Cancel or follow these
steps:
1 Press Intercom-Ring or Intercom-Voice.
2 Lift your handset.
3 Dial *82.
To set reminder times from attendant consoles:
1 Press Reminder Set or lift your handset and
dial *81.
2 Press the Auto Intercom button of the phone
for which you're setting a time. (This can be
your own console.)
3 Dial the 4-digit reminder time in a 12-hour
format (1200 through 1159).
MERLIN II System Features
(Continued)
3-113
Advertisement
Table of Contents
