Table of Contents
Advertisement
Administration Menu Map
Figure 3-2 shows an overview of menu-driven administration. This display-
based method of administering features is used only with the MERLIN II
System Display Console.
The menu map in Figure 3-2 shows the menu-driven administration
hierarchy. By referring to this map you'll always know where you are in the
administration process to keep administration time to a minimum.
To enter administration mode, slide the T/P switch to P and press Conference
twice. The first four categories of the administration menu appear on the
display (System, FlexNum, Lines, and Stations) followed by the word
"More." Each of the five buttons below the display aligns with a
corresponding entry on the display.
NOTE:
Four of five buttons on the Administration Overlay (Next, Bksp,
Exit, and Enter) are labeled. If a display entry appears above any of
these buttons, use the button to perform that function. If no display
entry appears use the button to perform the function designated on
the overlay.
If you are administering a feature under one of the remaining nine categories,
you press the button aligned with "More" and the display provides the next
four categories (Options, Tables, SpdDial, and Night) and again, the word
"More." Each time you press the button aligned with "More," the display
reveals up to as many as the next four categories.
Once you have selected the category you want, you also advance within a
category using the "More" button. For example, if you want to administer the
day of the week to enable Night Service, you enter administration mode and
press the "More" button once. The display now shows the categories
Options, Tables, SpdDial, and Night. Press the button aligned with "Night"
and the display shows the features Group, OutRstr, Emerg, and Exclude
followed by "More." Press the button aligned with "More" and the display
shows the features Start, Stop and DayofWk. Press "DayofWk" and
administer the feature.
When you're in a menu and have administered a feature, you don't have to
go back to the main categories to access other features. In most cases, each
level of administration provides a way to move around within that level by
pressing the "More" button. For example, if you finished administering the
DayofWk in Night Service, you can move to administering Emergency
numbers by pressing the "More" button.
Overview 3 - 3
Advertisement
Table of Contents
