Table of Contents
Advertisement
RELATED FEATURES
For Call Report, you must set the initial time and the date, and reset the time as needed,
such as when daylight saving time goes into effect. You also have the option of setting the
type of calls and the minimum duration of a call that will be reported.
To
set the time and date for the system:
1
Enter administration mode by sliding the T/P switch to P.
2
Press Conference twice.
The administration menu appears.
Press
3
[System], [More], [Time].
4
Dial two digits for the hour (00 through 23) and two digits for the minute (00 through 59).
5
Press
[Enter].
Press
6
[Date].
7
Dial two digits for the month (01 through 12), two digits for the day (00 through 31), and
two digits for the year (00 through 99).
Press
8
[Enter].
9
Press Conference to return to the main administration menu or leave
by sliding the T/P switch to the center position.
3-34 MERLIN II System Features
If you have assigned a System Speed Dial code to an outside number,
you can specify which of these numbers should be printed on call
reports and which should remain private. When a System Speed Dial
code is designed as private or "marked," the 4-digit code ( #600
through # 729) is printed on the call report in place of the telephone
number.
A call report includes only the first 15 digits of a telephone number or
account code. If the number contains more than 15 digits, a "?" is printed
on the sixteenth position.
In behind-switch operation, system speed dial numbers provided by the
host system print as a # sign in place of the telephone number.
Account Code Entry
How to Administer
administration mode
(Continued)
Advertisement
Table of Contents
