Call Restriction - AT&T Merlin II Release 3 System Manual

To specify Call Report options:
1 Enter administration mode by sliding the T/P switch to P.
2 Press Conference twice.
The administration menu appears.
Press
3
[More], [Options], [More], [ S M D R ] .
4 Press
[MinTime].
Dial the minimum call duration in seconds (0 through 255).
5
NOTE:
Use backspace or Drop to erase the current entry.
Press
6
[Enter].
7 Press
[CallRep].
8 Press the appropriate key for the types of calls you want recorded:
= record incoming and outgoing calls
[In/Out]
= record outgoing calls only
[OutOnly]
Press Conference to return to the main administration menu or leave administration mode
9
by sliding the T/P switch to the center position.
To print your Call Report options:
1 Enter administration mode by sliding the T/P switch to P.
2 Press Conference twice.
The administration menu appears.
3 Press
[More], [More], [Print], [More], [More].
4
Press
[SMDR]
NOTE: Follow this procedure if the printer doesn't form feed automatically and the
report heading appears at any place but at the top of the page. From the
administration menu, press
5 Press Conference to return to the main administration menu, or leave administration
mode by sliding the T/P switch to the center position.

Call Restriction

DESCRIPTION
How to Administer (Continued)
to begin printing.
When the system is first installed, people can use their telephones to place
intercom, local, and toll calls. However, you can assign either of two types of
call restrictions for selected phones:
Outward Call Restriction. Restricts phones so they can place only
intercom calls.
Toll Call Restriction. Restricts phones so they can place only intercom
and local calls.
[More], [Options], [More], [SMDR], [New Pg].
MERLIN II System Features
3-35