Position Busy - AT&T SYSTEM 25 User Manual

Position Busy

You can make your SLAC temporarily unavailable to most
incoming calls by pressing (POS BUSY). This places your console
in the Position Busy mode and turns on the light next to your
(POS BUSY) button.
If your company has two attendant consoles, the system sends
your incoming calls to the other attendant while your console
is in the Position Busy mode. (Only one console can be in the
Position Busy mode at the same time.)
If your company has only one attendant console, you can
activate Position Busy only if another voice terminal has been
specifically administered as a backup answering position.
Using the Position Busy Feature
To turn on
To turn off this feature:
Display:
Activating and deactivating Position Busy does not affect the
current display.
44
Position Busy:
Press (POS BUSY) .
The light next to this button turns on.
Press (POS BUSY) again.
The light next to this button turns off.