Table of Contents
Advertisement
How to Program
To set the time, day, and date:
1 Press Set until the item you want to change
flashes.
2 Press Fwd or Rev to advance or reverse the
time, day, or date.
3 When you are finished, touch Exit.
To set the alarm:
1 Press Set until the item you want to change
flashes.
2 Press Fwd or Rev to advance or reverse the
time until the displays shows the time you
want the alarm to sound.
3 When you are finished, touch Exit.
Do Not Disturb
DESCRIPTION
CONSIDERATIONS
Time-Keeping Features of the BIS-34D, BIS-22D, and Sp-34D Phones
The time-keeping features of the BIS-34D, BIS-22D, and the SP-34D phones
allow you to set an alarm as well as the clock and date.
NOTE:
The BIS-22D display phone functions the same as the BIS-34D.
When you do not want to be bothered by ringing calls, use the Do Not
Disturb feature. When you receive outside calls, the green light next to the
line button flashes, but your phone does not ring. When internal callers call
you, they get a busy signal.
Calls can still be transferred to you (the green light next to the line button
flashes), but your phone does not ring. If a call is transferred using a voice
announcement, the caller hears a busy signal, but the call is transferred to
your phone.
When you activate Do Not Disturb at your phone, the green light goes on
next to your Auto Intercom button at other people's phones.
Calls from people within the MERLIN II system who have primary Cover
buttons programmed for your phone ring even if you have activated the
Do Not Disturb feature. This allows an attendant to notify you when you
receive an important call.
If you activate the Do Not Disturb feature while someone is announcing a
call through your phone speaker, the call is dropped.
If you transfer a call, but no one answers, you will still hear the transfer
return ring, even if you have activated the Do Not Disturb feature.
How to Use
To start the timer:
1 Press Time/Timer.
2 Press Start to reset the timer to 00:00 and start
the timer.
3 When you are finished using the timer, touch
Stop.
To display the clock/calendar:
1 Press Time/Timer.
MERLIN II System Features
3-53
Advertisement
Table of Contents
