Saved Number Redial - AT&T Merlin II Release 3 System Manual

Saved Number Redial

DESCRIPTION
CONSIDERATIONS
How to Program
1
Label a button.
2 Enter programming mode by sliding the T/P
switch to P. (Digital phones: Dial #33.)
3 Press the button you want to program.
4 Dial *74 (you do not need to dial an outside
number).
5 Leave programming mode by sliding the T/P
switch to the center position. (Digital phones:
Dial #00.)
If you have programmed a Saved Number Redial button, you can use the
button to save an important number for later one-touch dialing. If the number
you call is busy or no one answers, or if you need to call the person back,
you can save that number by pressing Saved Number before you hang up.
Later, when you press Saved Number again, your phone automatically redials
the last number you have saved.
You can program more than one Saved Number Redial button for your
phone, so that, if necessary, you can save several calls during the day.
With multiple Saved Number buttons you will need a method of
identifying who or what number is being called on each Saved Number
button as you use them.
A Saved Number Redial button saves manually dialed numbers and
numbers dialed with an Outside Auto Dial button.
How to Use
To use a button to save a number for redialing:
1 Before you hang up your handset from a call
in progress, press Saved Number.
2 Hang up your handset.
The MERLIN II system saves this number until
you repeat this procedure to save another number.
To redial the number later:
1 Without lifting your handset, press Saved
Number.
Your phone speaker goes on, and you hear dialing.
2 When you hear the other person answer, lift
your handset and begin talking.
If the line is busy, or if no one answers:
1 Press Speaker to cancel the call.
To use this feature with basic telephones, see the
User's Guide: Basic Touch-Tone and Rotary Telephone
for the MERLIN II Communications System with
Release 3.
MERLIN II System Features 3-119