Table of Contents
Advertisement
Loudspeaker Page
DESCRIPTION
CONSIDERATIONS
RELATED FEATURES
1 Enter administration mode by sliding the T/P switch to P.
2 Press Conference twice.
The administration menu appears.
3 Press
[More], [Options], [XtrnPg].
4 Press line button:
Green light on = Loudspeaker Page jack
Green light off = standard line or Music-on-Hold jack
5 Press Conference to return to the main administration menu or leave administration mode
by sliding the T/P switch to the center position.
3-90 MERLIN II System Features
When you have an optional loudspeaker paging system attached to the
control unit of the MERLIN II system, you can page people and make
announcements over the system from your console or phone.
You must identify the line jack to which the loudspeaker paging system is
connected, then you can assign that line to attendant consoles and
appropriate phones.
There can be only one Loudspeaker Page system jack.
You can designate any line jack as the Loudspeaker Page system jack
except the line jack of any of the following:
A line that is contained in a line pool
A line to which the Music-on-Hold source is connected
A line that is designated as a tie line
The Loudspeaker Page feature can be especially helpful to the attendant.
If the person for whom a call is intended may be in one of several
locations, the attendant can park the call and then use Loudspeaker Page
to announce the call. The person can then go to the nearest phone and
use Call Pickup or Line Pickup to answer the call.
Only one person at a time can use the paging system.
People without Loudspeaker Page buttons can use the Loudspeaker
feature by using Call Pickup.
Call Park
Call Pickup
How to Administer
Page
Advertisement
Table of Contents
