AT&T Merlin II Release 3 System Manual page 137

To create a new message:
1
Enter administration mode by
2 Press Conference twice.
The administration menu appears.
3 Press
[More], [More], [Label].
4 Press
[PostMsg].
5 Dial the message number (01 through 20).
Press
6
[Enter].
7 Enter your new message.
NOTE: If you are replacing a message, use the backspace key to type over the existing
message or press Drop to erase the entire message.
8
Press
[Enter].
9 Press Conference to continue administration or leave administration mode by sliding the
T/P switch to the center position.
How to Program
1 Label a button.
2 Enter programming mode by sliding the T/P
switch to P. (Digital phones: Dial #33.)
3 Press the button you want to program.
4 Dial *101.
5 Leave programming mode by sliding the T/P
switch to the center position. (Digital phones:
Dial #00.)
Privacy
DESCRIPTION
CONSIDERATIONS
3-108 MERLIN II System Features
How to Administer
sliding the T/P switch to P.
If you share an outside line with other people, you may choose to program a
Privacy button that allows you to prevent others from accidentally joining
your telephone conversations.
To turn the Privacy feature on and off, you can use a dial code instead of
programming a button. However, if you use a dial code to turn on this
feature, you will not have a light to remind you that the feature is active.
You can activate the Privacy feature during a call in progress. For
example, you may want someone to bridge onto a call and then make the
call private.
How to Use
To post a message:
1 Press Posted Message.
The green light flashes.
2 Dial the code for the posted message you want
(01 through 20).
The green light is steady.
To cancel a posted message:
1 Press Posted Message.
2 Dial 00.