Table of Contents
Advertisement
RELATED FEATURES
On analog phones, the system automatically assigns the main pool or pool
Access to the two buttons above the Intercom buttons, and you cannot
change this assignment. On the 7406D phone, the main pool or Pool
Access is automatically assigned to buttons in the leftmost and middle
column. Figures 3-9 and 3-10 show the order in which lines are assigned
to phones in pooled systems.
If you're administering a new system, all your lines are initially assigned
to the main pool (default pool 9). If you want to assign lines to other line
pools, you have to remove them from the main pool first.
If a line appears as an individual line at a phone in your system, it will
disappear from that phone if you add it to a line pool. Before adding lines
to pools, make sure they aren't needed as individual lines.
System Type
By default, the system assigns
the Main Pool or Pool Access
to the first two buttons on
analog phones. If you assign
additional lines or line pools,
they appear on buttons in the
order shown.
FIGURE 3-9 The order in which lines and line pools are assigned to analog
p h o n e s .
MERLIN II System Features
3-81
Advertisement
Table of Contents
