Creating Dhcp Option; Configuring Dhcp Client Using Snmp; Ws-Sw-Dhcp-Mib - Motorola WS5100 Series Migration Giude

6.3.4 Creating DHCP option

1. To create a non standard option named "tftp-server".
WS5100(config)#ip dhcp option tftp-server 183 ip
2. Enter the DHCP pool —"test".
WS5100(config)#ip dhcp pool test
3. Assign a value to the DHCP option configured above.
WS5100(config-dhcp)#option tftp-server 192.168.0.100
4. Exit from the DHCP instance.
WS5100(config-dhcp)#exit

6.4 Configuring DHCP Client using SNMP

The SNMP information described below is an extract from the MIB, which is a hierarchial database where
each entry is addressed by an object identifier.
Object identifiers are unique Ids that identify each object in a MIB database. A typical example of an Object
Identifier (OID) is: 1.3.6.1.4.1.388.14.2.3.4.1
Objects can be classified as Scalar and Tabular.
• Scalar objects can be accessed directly through the OID that are unique to each object.
• Tabular objects are referred through a combination of the OID of the columns and the unique index
assigned to each row in the table.
Refer to following SNMP table structure to confiure DHCP using SNMP:
•

WS-SW-DHCP-MIB

• WS-SW-DHCP-SERVER-MIB
6.5 WS-SW-DHCP-MIB
The WS-SW-DHCP-MIB.mib file provides a description of all the OIDs defined for managing and configuring
the Dynamic Host Control Protocol (DHCP) Client.
6-5
DHCP