Configuring Ldap - Motorola WS5100 Series Migration Giude

9-14 WS5100 Series Switch Migration Guide
c. In the Accounting section, enter the Accounting Server IP Address.
• This should be the same as mentioned in Step 4,
Radius server accounting (or)
• As mentioned in
d. Click on
e. Click OK
4. Repeat Steps 1 - 3 to create another ESSID called TLS-TEST. Ensure you have a DHCP server and other
configurations like VLAN's etc setup appropriately.

9.3.3 Configuring LDAP

Follow the steps mentioned below to configure a LDAP Radius.
1. Click on Security
2. Select Authentication
3. In the Authentication section, select
4. Enter the Primary LDAP Server
5. Click Apply.
Attribute
IP Address
Port
Bind-DN
Base-DN
Bind-Password
User Login Filter
Password Attribute
Group Membership
Attribute
Group Filter
Step 3a above.
OK to save the configuration changes made in Radius Configuration dialog box.
to save and close the Wireless LANS Edit dialog box.
> Radius Server from the main menu tree.
tab to display the create a LDAP Radius configuration.
ldap
details by referring to the LDAP configuration table below.
192.192.4.42
389
cn=blradmin,ou=WID,dc=TVLAB01,dc=com cn should be your server's
ou=WID,dc=TVLAB01,dc=com
Symbol123
(sAMAccountName=%{Stripped-User-
Name:-%{User-Name}})
UserPassword
cn
(|(&(objectClass=group)(member=%{Ldap-
UserDn
}))(&(objectClass=GroupOfUniqueNames)(
uniquemember=%{Ldap-UserDn})))
Configuring a Radius Server
as the Auth Data Source.
Value
This is the IP address of the Windows
Active Directory Server
LDAP Port Number. Don't change this
administrator name. Copy the OU and
DC values for your server looking at the
Active Directory snapshot above.
cn should be your server's
administrator name. Copy the OU and
DC values for your server looking at the
Active Directory snapshot above.
This is the password for your Windows
Server administrator account.
Copy this Value as is.
Copy this Value as is.
Copy this Value as is.
Copy this Value as is.
for using Local
Comments