D-Link DGS-3620-28PC-SI Product Manual page 295

Product manual

Table of Contents

xStack® DGS-3620 Series Managed Switch Web UI Reference Guide

The fields that can be configured are described below:

Enter a unique identifier number for this profile set. This value can be set from 1 to 6.

Profile ID (1-6)

Select profile based on Ethernet (MAC Address), IPv4 address, IPv6 address, or packet

content. This will change the window according to the requirements for the type of profile.

Select Ethernet ACL to instruct the Switch to examine the layer 2 part of each packet

Select IPv4 ACL to instruct the Switch to examine the IPv4 address in each frame's header.

Select IPv6 ACL to instruct the Switch to examine the IPv6 address in each frame's header.

Select Packet Content to instruct the Switch to examine the packet content in each frame's

Allows users to examine up t o 4 s pecified offset_chunks within a packet at one time and

Packet Content

specifies the frame content offset and mask. There are 4 chunk offsets and masks that can

be configured. A chunk mask presents 4 bytes. 4 of fset_chunks can be s elected from a

possible 32 predefined offset_chunks as described below:

offset_chunk_1,

offset_chunk_2,

offset_chunk_3,

offset_chunk_4.

Figure 7-18 Add ACL Profile (Packet Content ACL)