Radius; Authentication Radius Server Settings - D-Link DGS-3620-28PC-SI Product Manual

xStack® DGS-3620 Series Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Unit
From Port / To Port
MAC Address
Click the Apply button to accept the changes made.

RADIUS

Authentication RADIUS Server Settings

The RADIUS feature of the Switch allows the user to facilitate centralized user administration as well as providing
protection against a sniffing, active hacker.
To view this window, click Security > RADIUS > Authentication RADIUS Server Settings as shown below:
The fields that can be configured are described below:
Parameter
Index
IPv4 Address
IPv6 Address
Authentication Port
(1-65535)
Accounting Port (1-65535)
Timeout (1-255)
Figure 8-21 Reauthenticate Host-based Port(s) window
Description
Select a unit you want to display.
Use the drop-down menus to select a range of ports to display.
Tick the check box and enter the MAC address.
Figure 8-22 Authentication RADIUS Server Settings window
Description
Choose the desired RADIUS server to configure: 1, 2 or 3 and select the IPv4
Address.
Set the RADIUS server IP address.
Set the RADIUS server IPv6 address.
Set the RADIUS authentication server(s) UDP port which is used to transmit
RADIUS data between the Switch and the RADIUS server.
Set the RADIUS account server(s) UDP port which is used to transmit RADIUS
accounting statistics between the Switch and the RADIUS server.
Set the RADIUS server age-out, in seconds.
332