Table of Contents
Advertisement
xStack® DGS-3620 Series Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Interface Name
Source IP Address
Source Netmask
Click the Find button to locate a specific entry based on the information entered.
Click the View All button to view all the interfaces configured on this switch.
DVMRP Routing Next Hop Table
This window is used to display DVMRP routing next hop table on the Switch.
To view the following window, click L3 Features > IP Multicast Routing Protocol > DVMRP > DVMRP Routing
Next Hop Table, as shown below:
The fields that can be configured are described below:
Parameter
Interface Name
Source IP Address
Source Netmask
Click the Find button to locate a specific entry based on the information entered.
Click the View All button to view all the interfaces configured on this switch.
PIM
Protocol Independent Multicast (PIM) is a family of multicast routing protocols for Internet Protocol (IP) networks
that provide one-to-many and many-to-many distribution of data over a LAN, WAN or the Internet. PIM is protocol-
independent as it does not include its own topology discovery mechanism, but uses routing information supplied by
other traditional routing protocols, such as RIP or OSPF. The Switch supports four types of PIM, Dense Mode
(PIM-DM), Sparse Mode (PIM-SM), PIM Source Specific multicast (PIM-SSM), and Sparse-Dense Mode (PIM-DM-
SM).
Figure 5-78 DVMRP Neighbor Table window
Description
Enter the name of the interface.
Enter the IP address of the destination.
Enter the netmask of the destination.
Figure 5-79 DVMRP Routing Next Hop Table window
Description
Enter the name of the interface.
Enter the IP address of the destination.
Enter the netmask of the destination.
210
Advertisement
Table of Contents
