Ip Route Filter; Ip Prefix List Settings - D-Link DGS-3620-28PC-SI Product Manual

xStack® DGS-3620 Series Managed Switch Web UI Reference Guide

IP Route Filter

IP Prefix List Settings

This window is used to create and configure an IP prefix list.
To view the following window, click L3 Features > IP Route Filter > IP Prefix List Settings, as shown below:
The fields that can be configured are described below:
Parameter
Prefix List Name
Click the Find button to locate a specific entry based on the information entered.
Click the Add button to add a new entry based on the information entered.
Click the View All button to display all the existing entries.
Click the Delete All button to remove all the entries listed.
Click the Clear Counter button to see the clear counter window.
Click the View Detail link to view more information regarding the specific entry.
Click the Edit button to re-configure the specific entry.
Click the Clear button to delete the information in the Description.
Click the Delete button to remove the specific entry.
Click the Clear Counter button to see the following window.
The fields that can be configured are described below:
Parameter
Prefix List Name
IP Address
Mask Address
Click the Clear button to remove the information entered.
Click the <<Back button to return to the previous window.
Click the Clear All button to remove all the entries.
Click the View Detail link to see the following window.
Figure 5-143 IP Prefix List Settings window
Description
Enter the name to identify the prefix list.
Figure 5-144 IP Prefix List Settings - Clear Counter window
Description
Enter the name of the prefix list that will be cleared.
Enter the IP address to be cleared.
Enter the mask address to be cleared.
253