Ip Interface; System Ip Address Settings - D-Link DGS-3620-28PC-SI Product Manual

xStack® DGS-3620 Series Managed Switch Web UI Reference Guide
Interface Name
State
Click the Add button to add a new entry based on the information entered.
Click the Find button to locate a specific entry based on the information entered.
Click the Clear button to clear all the information entered in the fields.

IP Interface

System IP Address Settings

The IP address may initially be set using the console interface prior to connecting to it through the Ethernet. The
Web manager will display the Switch's current IP settings.
NOTE: The Switch's factory default IP address is 10.90.90.90 with a subnet mask of 255.0.0.0 and a
default gateway of 0.0.0.0.
To view the following window, click Management > IP Interface > System IP Address Settings, as show below:
The fields that can be configured are described below:
Parameter
Static
DHCP
Enter the interface name of the IPv6 neighbor. Tick the All check box to search
for all current interfaces on the Switch. Tick the Hardware check box to display all
the neighbor cache entries which were written into the hardware table.
Use the drop-down menu to select All, Address, Static, or Dynamic. When the
user selects address from the drop-down menu, the user will be able to enter an
IPv6 address in the space provided next to the state option.
Figure 3-7 System IP Address Settings window
Description
Allow the entry of an IP address, subnet mask, and a default gateway for the Switch.
These fields should be of the form xxx.xxx.xxx.xxx, where each xxx is a number
(represented in decimal form) between 0 and 255. This address should be a unique
address on the network assigned for use by the network administrator.
The Switch will send out a DHCP broadcast request when it is powered up. The
DHCP protocol allows IP addresses, network masks, and default gateways to be
assigned by a DHCP server. If this option is set, the Switch will first look for a DHCP
server to provide it with this information before using the default or previously entered
settings.
32