Table of Contents
Advertisement
xStack® DGS-3620 Series Managed Switch Web UI Reference Guide
BGP Routing Table
This window displays BGP routing.
To view the following window, click L3 Features > BGP > BGP Routing Table, as shown below:
The fields that can be configured are described below:
Parameter
Type
Regexp
Filter List Name
Route Map Name
Prefix List Name
CIDR Only
Inconsistent AS
Community
Community List
IP Address
Figure 5-140 BGP Routing Table window
Description
Use the drop-down menu to select Regexp, Filter List, Route Map, Prefix List, CIDR Only,
Inconsistent AS, Community, Community List, IP Address or Network. The parameters in
the lower section changes based on the selected type.
Enter the regular expression that defines the AS path filter.
Enter the filter list name that was previously created in BGP AS Path Access Settings
window. This is used to display routes conforming to the filter list.
Enter the filter list name that was previously created by route map. This is used to display
routes matching the route map.
Enter the filter list name that was previously created by IP prefix list. This is used to
display routes conforming to the prefix list.
Tick Classless Inter-Domain Routing (CIDR) Only to just display routes with custom
masks.
Tick the check box to display the routes if they have of same prefix but different AS path
originate.
Community Set – Tick the check box and enter the community set. This value can be up
to 80 characters long.
Local AS - Do not send outside local AS (well-known community).
No Advertise - Do not advertise to any peer (well-known community).
No Export - Do not export to next AS (well-known community).
Internet - Send to the Internet (well-known community>.
Exact Match - If selected, communities need to match exactly.
Enter the community list. If the Exact Match check box is selected, communities need to
match exactly.
Display the host route that matches the specified IP address.
251
Advertisement
Table of Contents
