Table of Contents
Advertisement
xStack® DGS-3620 Series Managed Switch Web UI Reference Guide
Figure 11-9 TX Packets Analysis window (table for Bytes and Packets)
The fields that can be configured are described below:
Parameter
Port
Time Interval
Record Number
Bytes
Packets
Unicast
Multicast
Broadcast
Show/Hide
Click the Apply button to accept the changes made for each individual section.
Click the Clear button to clear all statistics counters on this window.
Click the
View Table
link to display the information in a table rather than a line graph.
Click the
View Graphic
link to display the information in a line graph rather than a table.
Errors
The Web manager allows port error statistics compiled by the Switch's management agent to be viewed as either a
line graph or a table. Four windows are offered.
Received (RX)
To select a port to view these statistics for, select the port by using the Port drop-down menu. The user may also
use the real-time graphic of the Switch at the top of the web page by simply clicking on a port.
Description
Use the drop-down menu to choose the port that will display statistics.
Select the desired setting between 1s and 60s, where "s" stands for seconds. The
default value is one second.
Select number of times the Switch will be polled between 20 and 200. The default
value is 200.
Counts the number of bytes successfully sent on the port.
Counts the number of packets successfully sent on the port.
Counts the total number of good packets that were transmitted by a unicast address.
Counts the total number of good packets that were transmitted by a multicast
address.
Counts the total number of good packets that were transmitted by a broadcast
address.
Check whether or not to display Bytes and Packets.
435
Advertisement
Table of Contents
