D-Link DGS-3620-28PC-SI Product Manual page 501

Product manual
Table of Contents

Advertisement

xStack® DGS-3620 Series Managed Switch Web UI Reference Guide
swBpduProtectionRecoveryTrap
swIpMacBindingViolationTrap
IMPB
swFilterDetectedTrap
DHCP Server
Screening
swPktStormOccurred
Traffic Control
swPktStormCleared
swPktStormDisablePort
swERPSSFDetectedTrap
ERPS
swERPSSFClearedTrap
swERPSRPLOwnerConflictTrap
newRoot
MSTP
topologyChange
dot1agCfmFaultAlarm
CFM
swCFMExtAISOccurred
CFM Extension
an under attack state, a trap will be sent out.
Binding objects:
(1)swBpduProtectionPortIndex
(2)swBpduProtectionPortMode
When the BPDU Protection trap is enabled, if the
specific port changes from an under attack state
to a normal state, a trap will be sent out.
Binding objects:
(1)swBpduProtectionPortIndex
(2)swBpduProtectionRecoveryMethod
When the IP-MAC Binding trap is enabled, if
there's a new MAC that violates the pre-defined
port security configuration, a trap will be sent
out.
Binding objects:
(1) swIpMacBindingPortIndex
(2) swIpMacBindingViolationIP
(3) swIpMacBindingViolationMac
Send trap when an illegal DHCP server is
detected. The same illegal DHCP server IP
address detected is just sent once to the trap
receivers within the log ceasing unauthorized
duration.
Binding objects:
(1) swFilterDetectedIP
(2) swFilterDetectedport
When packet storm is detected by packet storm
mechanism and take shutdown as action.
Binding objects:
(1) swPktStormCtrlPortIndex
When the packet storm is clear.
Binding objects:
(1) swPktStormCtrlPortIndex
When the port is disabled by the packet storm
mechanism.
Binding objects:
(1) swPktStormCtrlPortIndex
Signal fail detected on node.
Binding objects:
(1) swERPSNodeId
Signal fail cleared on node.
Binding objects:
(1) swERPSNodeId
RPL owner conflicted on the ring.
Binding objects:
(1) swERPSNodeId
The newRoot trap indicates that the sending
agent has become the new root of the
Spanning Tree; the trap is sent by a bridge
soon after its election as the new root, e.g.,
upon expiration of the Topology Change Timer,
immediately subsequent to its election.
Implementation of this trap is optional.
A topologyChange trap is sent by a bridge when
any of its configured ports transitions from the
Learning state to the Forwarding state, or from
the Forwarding state to the Blocking state. The
trap is not sent if a newRoot trap is sent for the
same transition. Implementation of this trap is
optional
This trap is initiated when a connectivity defect
is detected.
Binding objects:
(1) dot1agCfmMdIndex
(2) dot1agCfmMaIndex
(3) dot1agCfmMepIdentifier
A notification is generated when local MEP
enters AIS status.
Binding objects:
(1) dot1agCfmMdIndex
(2) dot1agCfmMaIndex
491
1.3.6.1.4.1.171.12.76.4.0.2
1.3.6.1.4.1.171.12.23.5.0.1
1.3.6.1.4.1.171.12.37.100.0
.1
1.3.6.1.4.1.171.12.25.5.0.1
1.3.6.1.4.1.171.12.25.5.0.2
1.3.6.1.4.1.171.12.25.5.0.3
1.3.6.1.4.1.171.12.78.4.0.1
1.3.6.1.4.1.171.12.78.4.0.2
1.3.6.1.4.1.171.12.78.4.0.3
1.3.6.1.2.1.17.0.1
1.3.6.1.2.1.17.0.2
1.3.111.2.802.1.1.8.0.1
1.3.6.1.4.1.171.12.86.100.0
.1

Advertisement

Table of Contents
loading

Table of Contents