Table of Contents
Advertisement
xStack® DGS-3620 Series Managed Switch Web UI Reference Guide
Enter the VLAN ID number in the field offered and then click the Find button. You will be redirected to the VLAN
List tab.
To create, delete and configure a VLAN Batch entry click the VLAN Batch Settings tab, as shown below.
The fields that can be configured are described below:
Parameter
VID List
Advertisement
Port List
Tagged
Untagged
Forbidden
Figure 4-6 802.1Q VLAN Settings – Find VLAN Tab window
Figure 4-7 802.1Q VLAN Settings – VLAN Batch Settings Tab window
Description
Enter a VLAN ID List that can be added, deleted or configured.
Enabling this function will allow the Switch to send out GVRP packets to outside sources,
notifying that they may join the existing VLAN.
Allows an individual port list to be added or deleted as a member of the VLAN.
Specify the port as 802.1Q tagged. Use the drop-down menu to designate the port as
tagged.
Specify the port as 802.1Q untagged. Use the drop-down menu to designate the port as
untagged.
Specify the port as not being a member of the VLAN and that the port is forbidden from
68
Advertisement
Table of Contents
