D-Link DGS-3620-28PC-SI Product Manual page 492

xStack® DGS-3620 Series Managed Switch Web UI Reference Guide
ipaddr: IP address.
ipv6address: IPv6 address.
username: user name.
Event description: Enable Admin failed authenticated by AAA local or server.
Log Message: Enable Admin failed through <Console | Telnet | Web(SSL)|
SSH> from <ipaddr | ipv6address> authenticated by AAA < local | server
<ipaddr | ipv6address>> (Username: <username>).
Parameters description:
local: enable admin by AAA local method.
server: enable admin by AAA server method.
ipaddr: IP address.
ipv6address: IPv6 address.
username: user name.
Event description: Successful login authenticated by AAA local or none or
server.
Log Message: Successful login through <Console | Telnet | Web(SSL) | SSH>
from < ipaddr | ipv6address > authenticated by AAA <local | none | server
<ipaddr | ipv6address>> (Username: <username>).
Parameters description:
local: specify AAA local method.
none: specify none method.
server: specify AAA server method.
ipaddr: IP address.
ipv6address: IPv6 address.
username: user name.
Event description: Login failed authenticated by AAA local or server.
Log Message: Login failed through <Console | Telnet | Web(SSL)| SSH> from
<ipaddr | ipv6address> authenticated by AAA <local | server <ipaddr |
ipv6address>> (Username: <username>).
Parameters description:
local: specify AAA local method.
server: specify AAA server method.
ipaddr: IP address.
ipv6address: IPv6 address.
username: user name.
Event description: When a client host fails to authenticate.
WAC
Log Message: WAC unauthenticated user (User Name: <string>, IP: <ipaddr |
ipv6address>, MAC: <macaddr>, Port: <[unitID:]portNum>)
Parameters description:
string: User name
ipaddr: IP address
ipv6address: IPv6 address
macaddr: MAC address
unitID: The unit ID
portNum : The port number
Event description: This log will be triggered when the number of authorized
users reaches the maximum user limit on the whole device.
Log Message: WAC enters stop learning state.
Event description: This log will be triggered when the number of authorized
users is below the maximum user limit on whole device in a time interval (5
min).
Log Message: WAC recovered from stop learning state.
Event description: When a client host authenticated successful.
Log Message: WAC authenticated user (Username: <string>, IP: <ipaddr |
ipv6address>, MAC: <macaddr>, Port: <[unitID:] portNum>)
Parameters description:
string: User name
ipaddr: IP address
ipv6address: IPv6 address
macaddr: MAC address
unitID: The unit ID
portNum : The port number
Event description: When a client host authenticated successful.
JWAC
Log Message: JWAC authenticated user (Username: <string>, IP: <ipaddr>,
MAC: <macaddr>, Port: <[unitID:]portNum>)
Parameters description:
string: Username
ipaddr: IP address
macaddr: MAC address
unitID: The unit ID
portNum : The port number
Event description: When a client host fails to authenticate.
Log Message: JWAC unauthenticated user (User Name: <string>, IP:
482
Warning
Informational
Warning
Warning
Warning
Warning
Informational
Informational
Warning