D-Link DGS-3620-28PC-SI Product Manual page 460

xStack® DGS-3620 Series Managed Switch Web UI Reference Guide
The number of switches in the switch stack (up to 12 total) are displayed next to the Tools drop-down menu. The
icons are in the same order as their respective Unit numbers, with the Unit 1 switch corresponding to the icon in the
upper left-most corner of the icon group.
When the switches are properly interconnected through their optional Stacking Modules, information about the
resulting switch stack is displayed under the Stacking Information link.
To view this window, click Tools > Stacking Information, as shown below.
The Stacking Information window displays the following information:
Parameter
Topology
My Box ID
Master ID
Box Count
Force Master Role
Box ID
User Set
Type
Exist
Priority
MAC
Prom Version
Runtime Version
H/W Version
Figure 12-4 Stacking Information window
Description
Show the current topology employed using this Switch.
Display the Box ID of the Switch currently in use.
Display the Unit ID number of the Primary Master of the Switch stack.
Display the number of switches in the switch stack.
Display force master role state
Display the Switch's order in the stack.
Box ID can be assigned automatically (Auto), or can be assigned statically. The
default is Auto.
Display the model name of the corresponding switch in a stack.
Denote whether a switch does or does not exist in a stack.
Display the priority ID of the Switch. The lower the number, the higher the priority.
The box (switch) with the lowest priority number in the stack denotes the Primary
Master switch.
Display the MAC address of the corresponding switch in the switch stack.
Show the PROM in use for the Switch. This may be different from the values shown in
the illustration.
Show the firmware version in use for the Switch. This may be different from the
values shown in the illustrations.
Show the hardware version in use for the Switch. This may be different from the
values shown in the illustration.
450