Table of Contents
Advertisement
xStack® DGS-3620 Series Managed Switch Web UI Reference Guide
To view the following window, click L3 Features > OSPF > OSPFv2 > OSPF Interface Settings, as shown below:
The fields that can be configured are described below:
Parameter
Interface Name
Click the Find button to find the interface entered.
Click the View All button to view all the interfaces configured on this switch.
Click the Edit button to re-configure the selected entry.
After clicking the Edit button, the following window will appear.
The fields that can be configured are described below:
Parameter
Priority (0-255)
Metric (1-65535)
Authentication
Administrative State
Area ID
Figure 5-37 OSPF Interface Settings window
Description
Enter the name of the IP interface here
Figure 5-38 OSPF Interface Settings - Edit window
Description
Enter the priority for the Designated Router election. If a Router Priority of 0 is set,
the Switch cannot be elected as the DR for the network.
Enter the interface metric used.
Select the authentication used. Options to choose from are None, Simple and MD5.
When choosing Simple authentication, a password must be entered. When choosing
MD5 authentication, a Key ID must be entered.
Use the drop-down menu to enable or disable the administrative state.
Enter the area to which the interface is assigned. An Area ID is a 32-bit number in the
form of an IP address (xxx.xxx.xxx.xxx) that uniquely identifies the OSPF area in the
OSPF domain.
185
Advertisement
Table of Contents
