D-Link DGS-3620-28PC-SI Product Manual page 267

Product manual
Table of Contents

Advertisement

xStack® DGS-3620 Series Managed Switch Web UI Reference Guide
IP Address Prefix
List
Next Hop List
Next Hop Prefix
List
Metric
(0-4294967294)
Click the Apply button to accept the changes made.
Click the <<Back button to return to the previous window.
Click the Edit button under Set Clause to see the following window.
The fields that can be configured are described below:
Parameter
Action
Next Hop
Metric
(0-4294967294)
Click the radio button and specify to match the route according to the prefix list.
Click the radio button and specify to match the next hop of the route according to the
prefix list.
Click the radio button and specify to match the next hop of the route according to the
prefix list.
Click the radio button and specify to match the metric of the route.
Figure 5-151 Route Map Settings - Set Clause window
Description
Use the drop-down menu to Add or Delete a sequence entry.
Click the radio button to set the next hop attribute. Use the drop-down menu to select
between IP Address and Peer Address.
IP Address - IP address to set.
Peer Address - This will take effect for both the ingress and egress directions. For ingress
direction, the next hop will be set to the neighbor peer address. For egress direction, the
next hop associated with the route in the packet will be the local router ID address.
Click the radio button to enter the metric.
The BGP router will not send metrics associated with a route by default unless the metric
is egress set in the route map.
If the BGP route receives a route with a metric, then this metric will be used in best path
selection. This can be overwritten by the metric that is ingress set for the route. If the
received route has neither metric attribute nor metric ingress metric set, then the default
metric (0) will be associated with the route for the best path selection. If med-missing-as-
worst is enabled for the router, then a value of infinite will be associated with the route.
This will take effect for both ingress and egress directions.
257

Advertisement

Table of Contents
loading

Table of Contents