D-Link DGS-3620-28PC-SI Product Manual page 372

xStack® DGS-3620 Series Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Port Security Trap/Log
Settings
System Maximum
Address (1-3328)
Unit
From Port / To Port
Admin State
Lock Address Mode
Max Learning Address
(0-3328)
Click the Apply button to accept the changes made for each individual section.
Click the Edit button to re-configure the specific entry.
Click the View Detail button to display the information of the specific entry.
Click the View Detail button to see the following window.
Figure 8-52 Port Security Settings window
Description
Use the radio button to enable or disable Port Security Traps and Logs on the
Switch.
Enter the system maximum address.
Select the unit you want to configure.
Use the drop-down menus to select a range of ports to configure.
Use the drop-down menu to enable or disable Port Security (locked MAC address
table for the selected ports).
This drop-down menu allows the option of how the MAC address table locking will be
implemented on the Switch, for the selected group of ports. The options are:
Permanent – The locked addresses will only age out after the Switch has been reset.
DeleteOnTimeout – The locked addresses will age out after the aging timer expires.
DeleteOnReset – The locked addresses will not age out until the Switch has been
reset or rebooted.
Specify the maximum value of port security entries that can be learned on this port.
362