Table of Contents
Advertisement
xStack® DGS-3620 Series Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Unit
From Port / To Port
Link Event
Link Monitor
Critical Link Event
Threshold
Window
Click the Apply button to accept the changes made for each individual section.
Ethernet OAM Event Log
The window is used to show ports Ethernet OAM event log information.
To view this window, click OAM > Ethernet OAM > Ethernet OAM Event Log, as shown below:
Figure 10-18 Ethernet OAM Configuration Settings window
Description
Select the unit you want to configure.
Select a range of ports you wish to configure.
Use the drop-down menu to select the link events, Link Monitor or Critical Link Event.
Use the drop-down menu to select link monitor. Available options are Error Symbol,
Error Frame, Error Frame Period, and Error Frame Seconds.
Use the drop-down menu to select between Dying Gasp and Critical Event.
Enter the number of error frame or symbol in the period is required to be equal to or
greater than in order for the event to be generated.
Enter the period of error frame or symbol in milliseconds summary event.
424
Advertisement
Table of Contents
