Table of Contents
Advertisement
xStack® DGS-3620 Series Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
MEP Name
MEP ID (1-8191)
Port
MEP Direction
Click the Add button to add a new entry based on the information entered.
Click the <<Back button to discard the changes made and return to the previous page.
Click the
View Detail
link to view more information regarding the specific entry.
Click the Delete button to remove the specific entry.
NOTE: The MEP Name value should not be more than 32 characters.
After clicking the
View Detail
Figure 10-5 CFM MEP Settings (Add) Window
Description
Enter an MEP name. It is unique among all MEPs configured on the device.
Enter an MEP ID configured in the MA's MEP ID list.
Use the drop-down menu to select a port. This port should be a member of the MA's
associated VLAN. In CFM hardware mode, this port should be a tagged member of the
MA's associated VLAN.
This is the MEP direction.
Inward - Inward facing (up) MEP.
Outward - Outward facing (down) MEP.
NOTE: Only Outward is available when Hardware mode is selected in CFM MA
Settings window.
link, the following page will appear:
415
Advertisement
Table of Contents
