Table of Contents
Advertisement
xStack® DGS-3620 Series Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Description
Allow the entry of a VLAN ID or displays the VLAN ID of an existing VLAN in the Add/Edit
VID
VLAN tab. VLANs can be identified by either the VID or the VLAN name.
Allow the entry of a name for the new VLAN or for editing the VLAN name in the Add/Edit
VLAN Name
VLAN tab.
Select the unit you want to configure.
Unit
Enable this function to allow the Switch sending out GVRP packets to outside sources,
Advertisement
notifying that they may join the existing VLAN.
Display all ports of the Switch for the configuration option.
Port
Specify the port as 802.1Q tagging. Clicking the radio button will designate the port as
Tagged
tagged. Click the All button to select all ports.
Specify the port as 802.1Q untagged. Clicking the radio button will designate the port as
Untagged
untagged. Click the All button to select all ports.
Click the radio button to specify the port as not being a member of the VLAN and that the
Forbidden
port is forbidden from becoming a member of the VLAN dynamically. Click the All button to
select all ports.
Click the radio button to allow an individual port to be specified as a non-VLAN member.
Not Member
Click the All button to select all ports.
Click the Apply button to accept the changes made.
To search for a VLAN, click the Find VLAN tab. A new tab will appear, as shown below.
Figure 4-5 802.1Q VLAN Settings – Add/Edit VLAN Tab window
67
Advertisement
Table of Contents
